ASD ATL-4 2HP single-speed pump

The ATL-4 single-speed pump by the French brand ASD has a power of 1700 W and is specifically designed for hydromassage.

We also offer the two-speed version of this pump, with the same dimensions.

Dimensions
Length: 420 mm
Width: 170 mm
Height: 240 mm

Technical specifications
Power: 1.5 kW (2HP)
Current: 7.5 A
Speed: 2888 rpm
Maximum flow rate: 690 litres/minute

Pipe connections
Male thread (2-inch MBT) with a 78 mm outside diameter.
The pump unions are not included, but are available separately. This pump is normally connected to 2-inch pipes. You can also choose pump unions for 1.5-inch pipes or 63 mm pipes.

Cable and plug
The ATL-4 pump is delivered pre-cabled with an AMP plug (length 170 cm). You can also choose to have it pre-cabled by our team with a mini J&J plug.

An in.link plug is also available, but we recommend that you keep your existing cable if it's in good condition. Your pump may indeed be defective for many reasons, but the power cable is rarely to blame.

Similar pump
The ATL-4 2HP pump has the same thread size as the Waterway Executive pump, and roughly similar dimensions. If you want to replace your pump with another model, check beforehand the available space and the fixing distances as pipe connection adjustments may be necessary.

Warranty
2-year Tubs Parts warranty

Part numbers
ASD (Aqua System Design): 03C1501001

Wet end orientation

Standard exit

Exit to left

Exit to right

Plug types

AMP plug

J&J plug

in.link plug