CoverCatch

The CoverCatch is a practical and economical solution for keeping the cover close to the spa and off the ground. Install the arms low on the hot tub for an unobstructed view, or higher for added privacy. The CoverCatch may also be installed on a wall near the hot tub for easy cover storage.

The arms neatly fold out of the way while the cover is on your hot tub. It works equally well for spas that are partially sunken into a deck.

The depth of the U-shaped arms is 17 cm deep, so the CoverCatch only works with covers that are up to 8.5 cm thick at the thinnest point. Most covers are tapered so that rain runs off from the central fold towards the rim, so the thinnest point will normally be the side that is furthest from the fold. It will not work with our custom-made covers, which are 9 cm thick at the edges.

Type: Storage only - does not remove the cover
Mounting: Spa cabinet
Clearance required: 25 cm
Spa shapes: Anything but round
Maximum hot tub width: no limit
Maximum weight of the cover: 45 kg
Manufacturer: Leisure Concepts