LX Whirlpool BJZ150 single-speed pump, 1,33HP

The LX Whirlpool BJZ150 single-speed pump can be installed as a massage pump. The pump mixes air with water at very high pressure through an air injection system to produce very fine bubbles and obtain a "milky" water enriched with oxygen. The metal pump body contains several impellers to generate and handle the necessary pressure.

It is also marketed under the Wellis Oxygen brand.

Dimensions
Length: 420 mm
Height: 215 mm
Width: 200 mm

Technical specifications
Power: 1.0 kW (1.33 HP)
Current: 6.2A
Maximum flow rate: 80 litres per minute

Connections
Suction and discharge: internal connection with an internal threaded surface (diameter: 33 mm). You can screw a 32 mm F to 1" MPT union assembly or this union into it. Don't forget to add Teflon tape, which is essential to ensure watertightness.

Cables and plugs
The LX Whirlpool BJZ150 pump is delivered pre-cabled without plug (length 130 cm). If you are replacing an existing pump, you may be able to re-use your existing plug. You can also choose to have the pump pre-cabled by our team with an AMP plug or a mini J&J plug.

An in.link plug is also available, but we recommend that you keep your existing cable if it's in good condition. Your pump may indeed be defective for many reasons, but the power cable is rarely to blame.

Warranty
2-year Tubs Parts warranty

Part numbers
LX Whirlpool: BJZ150
Wellis / Phybris: ACM0738