JTC PCF230 TS two-speed pump
Pumps from Italian manufacturer JTC can be found on many European spas. This two-speed pump has a slow speed for filtration and heating, and a fast speed that runs the massage jets.
We also stock other JTC two-speed pumps from the same series with motor ratings of 2.4 HP and 2.4 HP slightly more powerful, as well as the single-speed 2,96 HP and 2,9 HP models.
Dimensions
Length: 400 mm
Width: 195 mm
Height: 215 mm
Technical specifications
Power high speed: 2,2 kW / 2,96 HP
Power low speed: 0,40 kW / 0,53 HP
Current high speed: 10,4 A
Current low speed: 2,2 A
Maximum flow rate: 830 liters/minute
Connections
Outflow and intake: male threaded with a 78 mm outside diameter (2-inch MBT).
The pump unions are included. This pump is normally connected to a 2-inch pipe.
Cables and plugs
The JTC PCF230 TS two-speed pump is delivered pre-cabled without plug. You can choose to have it pre-cabled by our team with an AMP plug or a mini J&J plug.
An in.link plug is also available, but we recommend that you keep your existing cable if it's in good condition. Your pump may indeed be defective for many reasons, but the power cable is rarely to blame.
Warranty
2-year Tubs Parts warranty
Part numbers
JTC: PCF230 TS
Wet end orientation
Standard exit
Exit to left
Exit to right
Plug types
AMP plug
J&J plug
in.link plug