Laing E10 pump with 3/4" barb connection and metal base

Name: Laing E10 3/4" with metal base
Brand: Laing
SKU: 4467
Price: 315 EUR
Availability: InStock

In stock

315,00€

incl. 20% VAT

Laing E10 pump with 3/4" barb connection and metal base - Click to enlarge

This small E10 filtration pump from Laing is a direct replacement for the pumps with a metal base (6000-125 and 6500-035) found on Sundance and Jacuzzi spas.

It is especially built to fonction 24-hour per day. This clever little pump has no spindle, so it is almost impossible for the water to leak from the wet end into the motor.

The pump is cabled, without a plug.

This pump is used on the following Sundance Spas:

680 Burlington, Hartford and Hawthorne equipped with a circulation pump (2008-2012)
780 Hamilton, Chelsee (2007-2013)
Certa, Camden (2009-2013)
Palermo, Bahia, Cayman (2006)
780 series (2005)
Sweetwater series: Palermo, Bahia, Cayman (2003-2004)

It is also used on the following Jacuzzi Spas:

J-200 : J-230, J-270 and J-280 equipped with a circulation pump (2007-2012)
J-300: J-320, J-325, J-330, J-335, J-340, J-345, J-350, J-355, J-360, J-365, J-370, J-375, J-380 and J-385 since 2002

Dimensions
Length: 152 mm
Width: 110 mm
Height: 125 mm
Metal base : 121 x 96 mm

Pipe connections
3/4" barb, connecting to 3/4" clear pipe using a hose clip.

The pump comes with a left-facing outlet, but you can easily change the direction to the top by loosening the screws that hold the pump to the metal base.

Technical specifications
Power : 60W, 1/40 HP
Flow rate : around 40 litres / minute (listed as 11 GPM)

Cable and plug
The pump is supplied pre-cabled without plug (length 110 cm). If you are replacing an existing pump, you may be able to re-use your existing power cord. There is a wiring diagram for connecting it up on the inside of the cover of the water-resistant electrical box.

You can also choose to have it pre-wired by our team with an AMP plug or a mini J&J plug.

Spare parts
The only replacement part of the Laing E10 pump is the rotor assembly (Ø 68 mm). and Ø 80 mm. Be careful not to confuse it with the Ø 80 mm version. Check the diameter of the part you want to replace!

Similar pump
The LX Whirlpool WE10 pump has the same motor power and thread size as the E10, and roughly similar dimensions. Please note that if you want to replace your pump with another model, you must check the use of space and the fixing distances as pipe connection adjustments may be necessary.

Warranty
2-year Tubs Parts warranty

Part numbers
Laing : E10-NSHNDNN2W-01, 10-0121M-K
Replaces Sundance Spas 6000-125 and 6500-035

Plug types