Lo-Chlor Leak Sealant 1 litre for pools

In stock
33,00€
incl. 20% VAT
Quantity:  
Lo-Chlor Leak Sealant 1 litre for pools - Click to enlarge
Lo-Chlor Leak Sealant 1 litre for pools - Click to enlarge
Lo-Chlor Leak Sealant 1 litre for pools - Click to enlarge

Small, hard to find leaks can be more than just annoying. Left untreated, water that has escaped can undermine your pool and equipment. While major leaks require structural repairs, minor leaks (salt and non-salt pools with a water loss rate not exceeding 1 inch per day in a 60,000 litre pool) can be easily treated with Leak Sealer by Lo-Chlor.

Leak Sealer can be used on concrete, plaster, Diamond Brite, porcelain tile and all cementitious materials. It will not work on a vinyl liner.

Leak Sealer will coagulate upon contact with the leak. It is designed only to seal minor leaks in rigid (non-flexible) materials including PVC pipes, skimmer line, skimmer box, or another hard pipe. It will not work on flex pipe. The application of the product requires water circulation during the process.

How to use it

  • Read the instructions first!
  • For an average pool water volume of 15,000 gallons, use one quart of Leak Sealer

Based on your filter type

Cartridge filter: by-pass or remove the filter cartridge needs before treating the pool with Leak Sealer.
Sand or DE filters: Adjust your water circulation valves to bypass the filter. If that’s not an option then you must set valves to recirculate. Do not allow Leak Sealant to flow through the filter.

  • Turn off the pump. If you know where the leak is and if it is near the water’s surface, then follow Direction set “A” on the bottle (add the Leak Sealer directly into the water in the vicinity of the leak). If you’re unsure of the leak location or if it’s in the piping, then follow Direction set “B” on the bottle.
  • Add Leak Sealer into the skimmer basket. If you have two skimmers, add half a quart of Leak Sealer into one skimmer and the other half of the quart into the other skimmer.
  • Wait 30 minutes after adding Leak Sealer and then turn on the pump and run it for at least 8 hours.
  • After 24 hours, check the water level to determine if a second application of Leak Sealer is needed. If not, people can enter the pool.

Dosage
1 litre of Leak Sealer is the recommended dose for a 60,000-litre pool

Contents
1 litre

Countries delivered
We supply this product throughout the European Union, with the exception of Finland, Belgium, Luxembourg, the Netherlands, Cyprus, Malta, Ireland and the Balearic Islands.

Part numbers
Lo-Chlor: LCC-500-0505

Documentation

Lo-Chlor Leak Sealant 1 litre for pools

Lo-Chlor Leak Sealant 1 litre for pools

If you have a spa or hot tub, the Spa Leak Sealer will fix any minor leaks in the shell or internal plumbing system.more information...
33,00€
In stock