LX Whirlpool EA350 single-speed pump, 1HP
Available in 1 week
134,00€
incl. 20% VAT
This single-speed pump is used for massage jets or for circulation, depending on the configuration of your spa.
Dimensions
Length: 390 mm
Width: 160 mm
Height: 205 mm
Technical specifications
Power: 770 W (1.0 HP)
Maximum flow rate: 320 liters/minute
Pipe connections
The pump comes with unions and o-rings for 1.5-inch pipes.
Cable and plug
The LX Whirlpool EA350 pump is delivered pre-cabled with an AMP plug (length 130 cm). You can also choose to have the pump pre-cabled by our team with a mini J&J plug.
Spare parts
We have the wet end, it's o-ring and the wet-end seal for this pump in our spare parts catalogue.
Similar pumps
- The EA450 pump, with a slightly higher motor power.
- The LX DH1.0 pump, with a slightly lower motor power. There are differences in the wet end, but if there is flexible pipe in the plumbing, it should be relatively easy to fit.
- The LX TDA100 and WPP100 pumps, with a slightly lower motor power and smaller. There are differences in the wet end, but if there is flexible pipe in the plumbing, it should be relatively easy to fit.
Warranty
2-year Tubs Parts warranty
Plug types
![AMP plug AMP plug](images/AMP_plug-im-120x96a.jpg)
AMP plug
![J&J plug J&J plug](images/JnJ_plug_mono-im-120x96a.jpg)
J&J plug
![in.link plug in.link plug](images/in-link_plug-im-120x96a.jpg)
in.link plug