MSpa 10 mA External PRCD with EU plug

This external PRCD is a safety switch installed on many MSpa inflatable spas. The PRCD plugs in to the power socket and the distribution plug, where it detects all electrical errors in both directions. The PRCD recognises all leakage current and stops powering the spa when they appear.

How to use it
Plug the device into the sector
Press the "Reinitialisation" button on the PRCD. The light turns red.
Press the "Test" button on the PRCD. The red light should turn off. If that is not the cas, the PRCD is defective. Contact a certified electrician to correct the error.
Press the "Reinitialisation" button on the PRCD again. The light should turn red. If that is the case, the spa is ready for use.

Do not use the spa if the PRCD does not work correctly.

Technical specifications
Operating voltage: 220 V/50 Hz
Rated differential current: 10 mA

Compatible inflatable spas
Pre-installed on all inflatable MSpas on the market since 2021, as well as the Delight range (Nest, Alpine, Tekapo, Silver Cloup, Aurora, Starry) on the market since 2020.
The Premium range (Soho, Camaro, Exotic, Mont Blanc) marketed between 2016 and 2020.
The Lite range in 2016 and 2017.

Part numbers
MSpa: B9301087, CM213678