Waterway 3.5" Front Access

The Waterway Lighting Kit incorporates all the parts needed to install a multicolor light fitting in your spa:

• a 3-1/2" light assembly
• two interchangeable blue and red coloured filters
• a standard 12V bulb
• a light harness without plug
• one nut
• a ridged gasket, to be placed on the inside of the hot tub
• a socket holder which fixes on the back of the light fitting
• a wrench, which allows you to open the light fitting from inside the spa

This fitting is called "Front Access" because you can use the wrench remove the lens and change the bulb from inside the spa. This nevertheless creates a risk of leaks in the future, and we recommend that you change the bulb from the back side if at all possible.

Dimensions
Face diameter: 82 mm
Drill diameter: 66 mm
Inner diameter: 56 mm
Cable length: 2.5m

Part numbers
Waterway: 630-6105