Waterway adjustable Mini Jet socket

The jet body (or socket) is the fitting attached to the spa (inside and outside of the spa wall), into which the jet slots. It consists of three parts: the socket itself, the back piece and its wall fitting, with a male thread.

The lower photo shows the jet in place, but you should purchase it separately if needed.

The sealing between the jet and the shell is provided by a gasket (to be purchased separately). We also recommend the use of neutral silicone (without aggressive solvents) on the wall fitting as well as on the threads to ensure a complete seal.

Dimensions
Length of the body: 72.5 mm
Inside diameter: 40 mm
Outside diameter: 64 mm

Pipe fittings
Water connection: 3/4-inch male barbed
Air connection: 3/8-inch male barbed

Part numbers
Waterway: 222-1040