Waterway ozone injector

This injector is used to dissolve ozone in water. If you are installing an ozonator on a spa that has never been equipped with this type of device, you will probably need this device and a 3/4-inch pipe to complete your installation.

The water flows through the 3/4-inch pipe, and sucks in ozonated air through a thin pipe that runs from the ozonator to the injector.

Be aware that installing an injector can be complicated. The venturi effect will only work if you have a significant pressure difference across the injector; i.e. maximum inlet pressure and minimum outlet pressure. Spa manufacturers do a lot of testing to find the optimal location for the ozone injector; be prepared to do the same if you install your own injection system.

Part numbers
Waterway: 672-3000