Waterway Spa Flo II single-speed pump
This Waterway Spa Flo II pump is used by many major spa brands. This 1 HP pump is a single-speed pump, used to run massage jets. It has an EMG Italian-made water-resistant 71/2 motor and a high-performance wet end.
Dimensions
Length: 360 mm
Width: 170 mm
Height: 210 mm
Technical specifications
Power: 0,76 kW
Current : 3,5 A
Connections
Outflow and intake: male threaded with a 61 mm outside diameter, so you can use a pump union for 1.5-inch pipe.
This pump is normally connected to 1.5-inch or 50 mm pipe.
Cable and plug
The Waterway Spa Flo II pump is delivered without plug and cable. If you are replacing an existing pump, you may be able to re-use your existing power cord. There is a wiring diagram for connecting it up on the inside of the cover of the water-resistant electrical box.
You can also choose to have the pump pre-cabled by our team with an AMP plug, a mini J&J plug or an in.link plug (220 cm long).
Spare parts
We have many spare parts for this pump including the wet end and the wet end seal.
Warranty
2-year Tubs Parts warranty
Part numbers
Waterway: 3410610-50, 3410310-11CEEA3
Wet end orientation
Standard exit
Exit to left
Exit to right
Plug types
AMP plug
J&J plug
in.link plug